LSI LOGIC FUSION-MPT SCSI DRIVER

The Monochrome setting enhances readability on a monochrome monitor. However, this does not indicate a hardware malfunction. In addition, a similar Exit screen appears when you exit most other screens, and it can be used to save settings. The following items describe the RAID volumes supported for these servers:. You may decide to change these default values if there is a conflict between device settings or if you need to optimize system performance.

Uploader:	Yozshulkis
Date Added:	1 July 2013
File Size:	7.70 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	73648
Price:	Free* [*Free Regsitration Required]

SCSI BIOS Configuration Utility

The initiator capabilities for this device. Specifies whether to enable an adapter upon the next boot. For more information, lsl Section D. From this screen you can start a verification of all sectors on the device see Device Verify Screen. The latter will be smaller because, when the array is created, the size is rounded down to loigc in drive-size variances within the same class of disk. This field is grayed out under the following conditions: The Configuration Utility will pause while the hotspare is being added.

the Drivers Database - Free Drivers and Support

Saving the configuration creates the array. Currently defined fusion-npt are: The behavior of executable items varies throughout the Configuration Utility.

Provides general help information.

CHS Mapping allows two settings: Up to four of fusoin-mpt total adapters in a system may be selected as bootable. When you press Enter, the following prompt appears:. The following acronyms are used:. The identifier of the array. Optional Select a single hot spare. This can greatly increase the level of protection that RAID 1 provides.

The Interrupt Request Line used by the adapter. If you press Ctrl-C, the message changes to the following:.

Disk is the primary disk for a two-disk mirror and is operating properly. Striped arrays do not support hotspares.

fusion-mppt All LSI Logic news releases financial, acquisitions, manufacturing, products, technology etc. Copies the data from the primary copy of the mirrored array to the secondary copy.

All, None or Supported. Press Y to start the synchronization, or N to cancel it. Then reboot the system to clear memory. This allows the user to select disks on this channel to be members of a mirrored array.

LSI News Archives

Caution - If you reboot the system without properly exiting from this utility, some changes may not take effect. You are asked to save changes, which will create the array.

Press Insert or Delete to add or remove an adapter to or from the boot order. To wait for the user to press a key, select Yes. Indicates whether to scan for LUNs greater than zero for a device. The BIOS encountered a problem with the adapter. Up, down, left, right movement to position the cursor.