CANON CLC 1120 DRIVER DOWNLOAD

Do not use water. You need not perform this step in the case of the universal cassette. Replace the transfer driver PCB. Be sure to record them on the service label. Locking the Developing Assembly The signal plate is faulty.

Uploader:	Jucage
Date Added:	23 August 2005
File Size:	34.62 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	30494
Price:	Free* [*Free Regsitration Required]

Controlling the Post-Cleaning Chargin For plain paper or special paper 1 mode; in sync with the fixing motor.

Canon CLC/CLCR Black OEM Toner Cartridge - 6, Pages

Page - Setting the Grid Bias and the Developing The copier may be adapted to SP-L2 Use it to adjust the separation charging bias when the site of installation copying on the 2nd side of a double-sided copy xlc, humidity by using thin paper. When the deck lifter is at the N. An appreciable amount of developer will fall out in the next step.

The C hopper is not supplying with toner. See the Reference Table.

Clean each time developing assembly each color is mounted. On the other hand, it does not allow the use of an object made of conducting material, pressure-sensitive paper, or carbon-backed paper. Registration of the Duplexing Unit 1 Slide out the duplexing, and open the duplexing feeding assembly.

Photo Gradation scale from No. Guide to the Reference Table The counter on the Counter Check screen is incremented under all conditions; i. Take care not to scratch the reflecting face silver colored of the copyboard cover. The fixing lower roller does not have any special marking. Secure all pulleys to caon lifter drive shaft; then, measure the distance from the base plate of the compartment to the top surface of the lifter to make sure that the lifter is level.

Do not insert a screwdriver or the like into the laser optical path at such times. Use it to adjust the signal value during initialization for the toner concentration sensor of all cnaon in relation to light reflected by the photosensitive drum. Detects the home position release position of the transfer drum unit.

Do NOT touch them in the field. Normal if the reading of DENS of the color for which E is indicated approaches '0' during copying. Figure 3 Remove the five screws [3], and detach the photosensitive drum cleaner blade.

Canon CLC 1120, 1130, 1150 Service Manual

For details of control, see the descriptions given for controlling the measurement of black toner concentration. Use it to adjust the target value for shading correction when copying positive film with the projector in use.

Figure 5 Remove the two screws [1], and disconnect the connector [2]; then, remove the transfer cleaner push-on brush unit. Figure Orientation of the Manual Pickup, Feed, and Separation Rollers When mounting each roller, be sure that the round marking [1], [2], [3] is at the copier's rear.

If contact is made near the front, lift it slightly to remove. Points to Note for Scheduled Servicing Be sure to check the values recorded on the label attached behind the right front cover.

Open the hopper, and insert the door switch actuator. The laser shutter is faulty.

Canon CLC 1120 Service Manual

Take care not to touch the transfer sheet. If images read by the scanner camon is to be sent to an external device, the color conversion block sends them in the form of RGB data. Do not shake the bottle until immediately before setting it to the hopper.

Black Toner Concentration Sensor Asse Basic Operation G.